Big Daddy's
Pinball Electronics For Sale
Resistors

Please Click Here if you do not see a menu frame on the left

Here's a real nice Resistor Color Code chart thanks to a guy named Sam Engstrom

1/4 Watt, 5%, Carbon Film Resistors
10-pack: $0.50
25-pack: $1.00
100-pack: $3.50
Select value:

1/4 Watt, 1%, Metal Film Resistors
10-pack: $1.50
25-pack: $3.00
100-pack: $10.50
Select value:

1/2 Watt, 5%, Carbon Film Resistors
10-pack: $1.00
25-pack: $2.00
100-pack: $7.00
Select value:

1 Watt, 5%, Carbon Film Resistors
10-pack: $2.00
25-pack: $4.00
100-pack: $12.00
Select value:

2 Watt, 5%, Carbon Film Resistors
10-pack: $4.00
25-pack: $8.00
100-pack: $24.00
Select value:

PartDescriptionPart NumberCost
.33 Ohm, 5 Watt, 1% Wire Wound Resistors
R12 on Gottlieb System-80 Power Supplies

RES500-0.33 $2.00 Each


PartDescriptionPart NumberCost
3 Ohm, 5 Watt, 5% Wire Wound Resistor

RES500-3 $1.00 Each

PartDescriptionPart NumberCost
5 Ohm, 5 Watt, 5% Cement Power Resistors

RES500-5 $0.75 Each

PartDescriptionPart NumberCost
25 Ohm, 5 Watt, 5% Cement Power Resistors
R2 on Bally AS-2518-18 and AS-2518-54 Rectifier modules

RES500-25 $0.75 Each

PartDescriptionPart NumberCost

27 Ohm, 5 Watt, 5% Cement Power Resistors
R149-R156 on Williams Sys 3-7 driver board
(lamp matrix section)
Better replacement than the factory installed resistors
I
nstall 1/4" off the board for better cooling.

RES500-27 $0.75 Each

PartDescriptionPart NumberCost
1.3K Ohm, 5 Watt, 5% Metal Oxide Resistor
R1 on Gottlieb System-80 Power Supplies

RES500-1.3K $0.75 Each

PartDescriptionPart NumberCost
620 Ohm, 10 Watt, 5% Wire Wound Resistors
R1 on Bally AS-2518-18, AS-2518-49, and AS-2518-54 Rectifier modules

RES1000-620 $1.00 Each

PartDescriptionPart NumberCost
5K Ohm, 1/2 Watt, Trimmer Pot
Bourns 3329-P (two shown for illustration only)

TRIM-3329P-5K $1.00 Each

PartDescriptionPart NumberCost
500 Ohm, 1/2 Watt, Trimmer Pot, Vertical Thumb Wheel
Bourns 3352-W (two shown for illustration only)
Works well for Gottlieb System-80 Power Supplies (POT1)

TRIM-3352W-500 $1.00 Each

PartDescriptionPart NumberCost
1000 Ohm, 1/2 Watt, Trimmer Pot, Vertical Thumb Wheel
Bourns 3352-W (two shown for illustration only)
Works well for Gottlieb System-1 Power Supplies (R4, R16)

TRIM-3352W-1K $1.50 Each

PartDescriptionPart NumberCost
1K Ohm, 1/2 Watt, Trimmer Pot, Vertical Thumb Wheel
Bourns 3386-P (two shown for illustration only)
Works well for Bally Squawk & Talk Boards (R69, R70)
(Similar to 3386F but the leads form a tighter triangle)

TRIM-3386P-1K $1.00 Each

PartDescriptionPart NumberCost
25K Ohm, 1/2 Watt, Trimmer Pot, Screwdriver Slot
Bourns 3386-F (two shown for illustration only)
Perfect for RT1 on Bally and Stern HV Regulators
(Similar to 3386P but the leads form a bigger triangle)

TRIM-3386F-25K $1.00 Each

PartDescriptionPart NumberCost
Metal Oxide Varistor (MOV), 60 Volt (Littelfuse)
VR1 on Bally AS-2518-18 and AS-2518-54 Rectifier Boards

MOV60 $0.75 Each

PartDescriptionPart NumberCost
Metal Oxide Varistor (MOV), 130 Volt (Littelfuse)
Used in the input power line for just about every pinball machine made

MOV130 $0.75 Each
PartDescriptionPart NumberCost
SIP Resistor Network, 47K Ohms, 3/4 Watt
Bourns 4606X-101-473
6-Pin, 5-Resistor
Bussed Resistor Network
Spec

$0.20 Each $1.50 10-Pack

RES-SIP6-47K $0.20 Each
$1.50 10-Pack

All items, descriptions, prices, and availability are subject to change without notice


[Home]


Big Daddy title, background art work, and Bally logo are copyright by Williams Electronics Co.
Gottlieb logos are copyright by D. Gottlieb & Company
All other content is copyright by Big Daddy Enterprises 2005 and may not be borrowed, copied,
downloaded, or reproduced in any way whatsoever without prior written consent from Big Daddy Enterprises